For assistance, information regarding, or to receive a copy of TAMKO’s Limited Warranty, contact us at 1‑800‑641‑4691 or visit us online at tamko.com
#10 × 2" SCREW#10 × 1" SCREW#10 X 1" SCREW#10 X 2" SCREW#10 × 2" SCREW#10 × 1" SCREW#10 X 2" SCREW#10 X 1" SCR
#10 × 1-3/4" SCREW#10 × 3" SELF-DRILLING SCREW#10 × 1" SCREW#10 X 1-3/4" SCREW#10 X 1" SCREWINSTALLATION INSTRUCTIONS FOR PO
For assistance, information regarding, or to receive a copy of TAMKO’s Limited Warranty, contact us at 1‑800‑641‑4691 or visit us online at tamko.com
1-7/8"MINIMUMFIG. 33. Lay the bottom rail beside the posts with the pre‑routed baluster holes facing upward and evenly spaced. Mark the rail wit
FIG. 1IMPORTANT PRODUCT SAFETY AND PRE-INSTALLATION INFORMATIONThe following installation instructions are provided to guide you through the installa
10. Determine the location of the top rail metal brackets (marked “T”). Insert balusters in the first and last holes of the bottom rail. (Fig. 7) Alig
POST MOUNT INSTRUCTIONS FOR WOOD/COMPOSITE DECK APPLICATIONIMPORTANT PRODUCT SAFETY AND PRE-INSTALLATION INFORMATIONThe following installation instr
POST MOUNT INSTRUCTIONS FOR CONCRETE APPLICATIONIMPORTANT PRODUCT SAFETY AND PRE-INSTALLATION INFORMATIONThe following installation instructions are
4. Drill four boreholes into the concrete to the required embedment depth using a hammer drill and 7/16" masonry drill bit. When drilling, check
#10 X 2" SCREW#10 X 1" SCREW45º FIXED ANGLE ADAPTER BOTTOM RAIL METAL BRACKET & ANGLE ADAPTERSTRAIGHT TOP RAIL ADAPTERSTRAIGHT BOTTOM
STRAIGHT RAIL KIT MOUNTED BETWEEN ANGLE ADAPTER AND A FLAT POST SURFACESTRAIGHT RAIL KIT MOUNTED BETWEEN ANGLE ADAPTERSANGLED POSTANGLED POSTSTRAIGHT
Comments to this Manuals